| Nominal sensing distance | 100mm |
| Sensitivity adjustment | Trimmer |
| Function Principle | Optic fiber amplifier |
| Description | Compact case without display |
| Optic position | axial |
| Functions | Optic fiber amplifier |
| Output type | PNP L/D selectable |
| Output Function | L/D selectable |
| Switching frequency | 1Khz (low speed) |
| Response time | 500µs (low speed) |
| Operating Voltage | 12...24VDC ± 10% |
| No-Load supply current | ≤ 30mA |
| Load current | ≤100mA |
| Output voltage drop | ≤1,2V@Iload=100mA |
| LED indicators | yellow (output state) green (stability, delay) green/red (Read/error) |
| Short-circuit protection | YES |
| Reverse Polarity Protection | Yes |
| Emission | LED Red (670 nm) |
| Interference to external light | according to EN 60947-5-2 : 2020 |
| Impulsive Overvoltage Protection | Yes |
| Insulation resistance | >20 MΩ 500 Vdc, between electronics and housing |
| Contact resistance | 500 Vac 1 min., between electronics and housing |
| Dimensions | 10x40x65 |
| Housing Material | ABS(Housing), PMMA (Optics) |
| Connections | M8 plug 4pin |
| Active Head Material | PMMA |
| Storage temperature | - 25°C…+70°C |
| Material | Plastic ABS / PC |
| Diameter/Dimension | Cubic |
| Approvals | CE cULus |
| Shocks and vibrations | 0.5 mm amplitude, 10 … 55 Hz frequency, for every axis (EN60068-2-6) |
| Dimensions | 10x40x65 |
| Operating Temperature | - 25°C…+ 55°C (Without freeze) |
| Mechanical Protection | IP67 with cover |
