| Nominal sensing distance | 0 … 40 m |
| Resolution | Single-beam |
| controlled height | Single-beam |
| Sensitivity adjustment | Trimmer |
| Effective Aperture Angle | ≤ ±2,5° |
| Function Principle | Receiver |
| Control unit to be used | SG-BWS-T4 Series |
| Description | M18 Type 4 LASER Safety Photocell Receiver |
| Functions | Receiver Laser for SG-BWS-T4 |
| Type | Type 4 safety photocell |
| PL | n/a |
| PFHd | n/a |
| Output type | PNP |
| Output Function | To be connectred to SG-BWS-T4 Safety Control Unit Series |
| Switching frequency | |
| Response time | 1 ms |
| Operating Voltage | 24 Vdc ±15% |
| No-Load supply current | ≤ 35mA |
| Load current | ≤ 100mA |
| LED indicators | Yellow (OUTPUT) - Green (STABILITY) |
| Short-circuit protection | YES |
| Reverse Polarity Protection | Yes |
| Emission | n/a |
| Interference to external light | according to EN 60947-5-2 : 2020 |
| Impulsive Overvoltage Protection | Yes |
| Insulation resistance | >20 MΩ 500 Vdc, between electronics and housing |
| Contact resistance | 500 Vac 1 min., between electronics and housing |
| Dimensions | Ø18x66 |
| Housing Material | Plastic ABS / PMMA |
| Connections | M12 plug |
| Active Head Material | PMMA |
| Storage temperature | -25…+70°C |
| Material | |
| Diameter/Dimension | |
| Vibrations | Width 0.35 mm, frequency 10 … 55Hz; 20 sweep per axis, 1octave/min (EN 60068-2-6) |
| Shocks | 16 ms (10 G) 1,000 shocks per axis (EN 60068-2-29) |
| Approvals | CE, cULus |
| Shocks and vibrations | 0.5 mm amplitude, 10 … 55 Hz frequency, for every axis (EN60068-2-6) |
| Supplied Accessories | 2 x nuts |
| Dimensions | M18 |
| Operating Temperature | -20…+55°C (Without freeze) |
| Mechanical Protection | IP67 |
