Vibrations and inclination sensor
| Operative range | ± 2g; ± 4g; ± 8g; ± 16g (selectable) | |
| Resolution | 15,62mg @ ± 2g 31,25mg @ ± 4g 62,50mg @ ± 8g 125mg @ ±16g | |
| Detection Axes | 3 (X, Y, Z) | |
| Technology | MEMS | |
| Output type | Digital + Analogue (I/V selectable) | |
| Output Function | Vibration amplitude | |
| Digital Output | RS485 57600 baud rate - 1 bit stop - no parity | |
| Voltage Analogue Output | 0…5V / 0…10V (selectable) | |
| Current Analogue Output | 4…20mA / 0…20mA / 0…24mA (selectable) | |
| Operating Voltage | 19,2 … 28,8 Vdc | |
| LED indicators | Green: Run mode Yellow: writing/programming memory Blue: transit of RS485 packet data Red: Interrupt active | |
| Reverse Polarity Protection | Yes | |
| Impulsive Overvoltage Protection | Yes | |
| Power Consumption | < 1 W | |
| Frequency Range | 0 … 400Hz | |
| Digital Resolution | 16 bit @RS485 (complementary to 2) | |
| Analogue Resolution | 12 bit | |
| Load Resistor (Voltage) | 1kΩ … 1MΩ | |
| Load Resistor (Current) | 100 … 500Ω | |
| Dimensions | M18 | |
| Housing Material | Stainless steel AISI316L (body) Grilamid (cable exit) | |
| Connections | pigtail 200mm + M12- 5 poles | |
| Active Head Material | Stainless steel AISI316L | |
| Operating temperature | -25°C …+70°C | |
| Storage temperature | -30°C … + 90°C (without ice) | |
| humidity | < 80% (without condensation) | |
| Approvals | CE | |
| Degree of protection | IP67 | |
| Supplied Accessories | 2 x nuts | |
| Dimensions | M18 | |
| Operating Temperature | -25°C …+70°C | |
| Humidity | < 80% (without condensation) | |
| Mechanical Protection | IP67 | |
