MDI58F/G - 63F/G

MDI 58 F / G - 63 F / G

Incremental Encoder 58F/G and 63F/G, Blind hollow shaft

Hollow shaft encoder series for industrial applications with high mechanical resistance requirements

  • 3 channel encoder (A / B / Z) up to 2500 ppr
  • Power supply up to +30 VDC with several electronic outputs available
  • Up to 220 kHz output frequency
  • Cable or connector output
  • Blind hollow shaft diameter up to 15 mm
  • Mounting by stator coupling, spring or anti-rotation pin




Indicative image

Technical features

Detection properties

Resolution da 100 a 2500 ppr
counting direction A leads B clockwise (shaft view)

Application

max output frequency 220 kHz

Outputs

Output type push-pull / line driver

Electrical data

Operating Voltage 5/30 = 4,5 ... 30 V DC (reverse polarity protection)
No-Load supply current 800 mW
max load current 20 mA / channel

Mechanical data

Weight 350 g (12,35 oz)
Housing Material PA66 glass fiber reinforced
Operating temperature -20° ... +70°C (-4° ... +158°F)
Storage temperature -25° ... +70°C (-13° ... +158°F)
max shaft load 200 N
Hole diameter ø 10 / 15 mm
max rotation speed 3000 rpm
moment of inertia 4 x 10-6 kgm2
starting torque at 20°c < 0,02 Nm (IP 54) < 0,06 Nm (IP 66)
Fixing torque for collar clamping 1 Nm max
shaft material 1.4305 / AISI 303 stainless steel
bearings 2 ball bearings
bearings life 109 revolutions

Test/Approvals

EMC compatibility IEC 61000-6-2 IEC 61000-6-4
Shocks and vibrations 10 G, 10 ... 2000 Hz (IEC 60068-2-6)
Degree of protection X = IP 54 (IEC 60529) S = IP 66 (IEC 60529)

Generical Data

Operating Temperature -20° ... +70°C (-4° ... +158°F)
Mechanical Protection X = IP 54 (IEC 60529) S = IP 66 (IEC 60529)