MDI40A

MDI 40

Incremental Encoder 40A, Solid shaft

Miniaturized ø 42 mm encoder series for general factory automation applications

  • 3 channel encoder (A / B / Z) up to 2500 ppr
  • Power supply up to +30 VDC with several electronic outputs available
  • Up to 220 kHz output frequency
  • Cable output, connectors available on cable end
  • 6 mm solid shaft diameter
  • Mounting by clamping flange




Indicative image

Technical features

Detection properties

Resolution da 100 a 2500 ppr
counting direction A leads B clockwise (shaft view)

Application

max output frequency 220 kHz

Outputs

Output type push-pull / line driver

Electrical data

Operating Voltage 5/30 = 4,5 ... 30 V DC (reverse polarity protection)
No-Load supply current 800 mW
max load current 20 mA / channel

Mechanical data

Weight 100 g (3,52 oz)
Housing Material PA66 glass fiber reinforced
Operating temperature -25° ... +85°C (-13° ... +185°F)
Storage temperature -25° ... +70°C (-13° ... +158°F)
max shaft load 5 N axial / radial
Shaft diameter ø 6 mm
max rotation speed 3000 rpm (IP 66) 6000 rpm (IP 54)
moment of inertia 0,1 x 10-6 kgm2
starting torque at 20°c < 0,01 Nm (IP 54) < 0,05 Nm (IP 66)
shaft material 1.4305 / AISI 303 stainless steel
bearings 2 ball bearings
bearings life 109 revolutions

Test/Approvals

EMC compatibility IEC 61000-6-2 IEC 61000-6-4
Shocks and vibrations 10 G, 10 ... 2000 Hz (IEC 60068-2-6)
Degree of protection X = IP 54 (IEC 60529) S = IP 66 (IEC 60529)

Generical Data

Operating Temperature -25° ... +85°C (-13° ... +185°F)
Mechanical Protection X = IP 54 (IEC 60529) S = IP 66 (IEC 60529)