SSF

SSF/0P-1E

Photo.M18,PNP-NO/NC,M12 plug,Fiber ampli

M18 photoelectric sensors for optical fibres

  • Models with sensitivity adjustment by teach-in button
  • With range of optical fibres are available
  • LED status indicator for all versions
  • Complete protection against electrical damages
  • Approvals: CE and cULus listed

       


Indicative image

Technical features

Detection properties

Nominal sensing distance Depending on optical fibres used
Thermal drift of Sr 10 % Sr
Repeat Accuracy 5%
Sensitivity adjustment Teach-in

Application

Function Principle Optic fiber amplifier
Optic position Axial

Outputs

Output type PNP L/D Selectable
Output Function L/D Selectable
Switching frequency 800Hz
Response time 625µs

Electrical data

Operating Voltage 10…30VDC
No-Load supply current ≤ 20mA
Load current ≤100mA
Leakage current ≤ 10 µA
Output voltage drop ≤2V@Iload=100mA
Max ripple content ≤10%
LED indicators Yellow (output status)
Time delay before availability ≤200ms
Short-circuit protection Yes
Reverse Polarity Protection Yes
Emission LED Red (660nm)
Interference to external light 3.000lux (incandescent lamp), 10.000lux (sunlight)
Impulsive Overvoltage Protection Yes

Mechanical data

Dimensions M18 x 1 / L = 90mm
Weight 70 g
Housing Material Nickel brass / PC plug
Connections M12 plug
Active Head Material Depending on optical fibres
Tightening torque 25Nm
Operating temperature - 25°C…+ 70°C (without freeze)
Diameter/Dimension M18

Test/Approvals

Approvals CE cULus
EMC compatibility EN 60947-5-2
Degree of protection IP67

Accessories

Supplied Accessories nuts M18 x 1

Generical Data

Dimensions M18 x 1 / L = 90mm
Operating Temperature - 25°C…+ 70°C (Without freeze)
Mechanical Protection IP67