S7

950551030

S7-5-E-P

Fiber optic amplifiers in a DIN rail compatible format for small object detection in limited spaces

  • High-resolution models with integrated display
  • 12 bit resolution and 50 µs response time
  • Trimmer or teach-in models
  • Wide range of accessory fiber optics
  • 4 wire NO/NC output or Remote teach input



Technical features

Detection properties

Nominal sensing distance 100mm
Sensitivity adjustment Teach-in

Application

Function Principle Optic fiber amplifier
Description Compact case with display
Optic position axial
Functions Optic fiber amplifier

Outputs

Output type PNP L/D selectable
Output Function L/D selectable
Switching frequency 5Khz (fast speed)
Response time 100µs (high speed)

Electrical data

Operating Voltage 12...24VDC ± 10%
No-Load supply current ≤ 50mA
Load current ≤100mA
Output voltage drop ≤2V@Iload=100mA
LED indicators yellow (output state) green (stability, delay, speed led) green/red (Read/error)
Short-circuit protection YES
Reverse Polarity Protection Yes
Emission LED Red (670 nm)
Interference to external light according to EN 60947-5-2 : 2020
Impulsive Overvoltage Protection Yes
Insulation resistance >20 MΩ 500 Vdc, between electronics and housing
Contact resistance 500 Vac 1 min., between electronics and housing

Mechanical data

Dimensions 10x40x65
Housing Material ABS(Housing), PMMA (Optics)
Connections 2m cable
Active Head Material PMMA
Storage temperature - 25°C…+70°C
Material Plastic ABS / PC
Diameter/Dimension Cubic

Test/Approvals

Approvals CE cULus
Shocks and vibrations 0.5 mm amplitude, 10 … 55 Hz frequency, for every axis (EN60068-2-6)

Generical Data

Dimensions 10x40x65
Operating Temperature - 25°C…+ 55°C (Without freeze)
Mechanical Protection IP67 with cover