FS

FS1/0N-C

Photo.Midi,NPN-NO/NC,Cable,Fiber ampli

Cubic amplifier unit for optical fibres - DC

  • Extremely reduced dimensions amplifier units (only 49 x 26 x15 mm)
  • Right angle cable exit or M12 plug cable for reducing the overall dimensions at minimum
  • Trimmer for sensivity adjustment
  • NPN or PNP outputs with selectable NO/NC
  • Red light beam with visible spot
  • Wide range of optical fibres (plastics and glass)
  • Complete protection against electrical damage
  • Fixing with M4 screws (2xM4, 20 mm step)

   


Indicative image

Technical features

Detection properties

Nominal sensing distance Depending on optical fibres used
Thermal drift of Sr ≤ 10% Sr
Repeat Accuracy ≤ 5%
Sensitivity adjustment Trimmer

Application

Function Principle Optic fiber amplifier
Optic position Axial

Outputs

Output type NPN L/D Selectable
Output Function L/D Selectable
Switching frequency 1Khz
Response time 500µs

Electrical data

Operating Voltage 10…30VDC
No-Load supply current ≤ 30mA
Load current ≤100mA
Leakage current ≤ 10μA @ Vmax
Output voltage drop ≤1,2V@Iload=100mA
Max ripple content ≤10%
LED indicators red (output state)
Time delay before availability ≤200ms
Short-circuit protection Yes
Reverse Polarity Protection Yes
Emission LED Red (660nm)
Interference to external light 3.000lux (incandescent lamp), 10.000lux (sunlight)

Mechanical data

Dimensions 15x26x67 mm
Weight 120 g
Housing Material Polyammide
Connections 2m PVC cable 90°
Active Head Material
Operating temperature - 25°C…+ 70°C (without freeze)
Diameter/Dimension Cubic

Test/Approvals

Approvals CE
EMC compatibility EN 60947-5-2
Shocks and vibrations Vibration IEC 60068-2-6 / Shock IEC 60068-2-27
Degree of protection IP67

Accessories

Supplied Accessories ST07 mounting bracket and screws

Generical Data

Dimensions 15x26x67 mm
Operating Temperature - 25°C…+ 70°C (Without freeze)
Mechanical Protection IP67